Last Upgraded on January 25 th, 2020

How to Clean Dyson Cordless (V6, V7, V8, V10) Including Filters and Bins

Dyson’s are great vacuum, as well as with their cordless versions taking the globe by tornado, you require to be planned for the unavoidable minute that you locate on your own going out to purchase one. Likewise, if you have actually currently purchased among these great equipments, you need to recognize just how to clean up as well as deal with your brand-new hoover.

Essential Security Cautions When Cleansing

While the things in this checklist might appear extremely noticeable, it is very important to take down them below prior to we begin our cleansing overview. Below are the important things you need to never ever do when you are keeping your hoover:

  • Do not utilize cleaning agents, brightens or air fresheners to clean up the clear container.
  • Do not place the clear container in a dish washer.
  • Do not place the filter in a dish washer, cleaning maker, roll clothes dryer, stove, microwave or near a nude fire.
  • Be careful of sharp things when looking for clogs.
  • Some items have carbon fiber brushes. Make sure if entering call with them, as they might create small skin irritability. Laundry your hands after taking care of the brushes.

In this overview, we take you with just how to clean up the head, filter, as well as container for each version in the V variety of cordless vacuum cleaners– so you are flawlessly notified.

Cleansing the Dyson V6

Cleaning the Dirt Container

Action 1: Getting rid of the BinIn order to launch the clear container from the cyclone, you require to press the red switch beside it in order to open up the base of the container. Press it a 2nd time to launch the clear container from the text. Eliminate it very carefully.

Action 2: Cleansing the Clear BinYou must just utilize a wet towel to clean up the within. See to it it is not as well damp, as well as carefully scrub the inside.

Action 3: Cleansing the ShroudTake the cleaning brush on the mix device as well as utilize it to carefully eliminate dust as well as dirt. You need to never ever submerse the cyclone system in water or put water right into the cyclones.

Action 4: Renovate the BinOnce the container is entirely dry, press it up as well as right into the text of the hoover. When you hear it click right into area, the job is done.

Cleaning the Filter

Action 1: Getting rid of the FilterMake certain the hoover is unplugged from the battery charger prior to you eliminate the filter, as well as do not push the “on” switch. Eliminate the filter by raising it out of the top of the maker.

Action 2: Cleaning the FilterUse chilly water to clean the filter by running it over the outdoors up until the water is clear. Press as well as turn the filter with both hands to eliminate any kind of excess water.

Action 3: Drying Out the FilterPlace the filter on its side as well as leave it to completely dry for a minimum of 24 hrs, or up until entirely dry.

Action 4: Changing the FilterPlace the completely dry filter back right into the top of the maker, make certain it is secured correctly, as well as you are great to go.

Cleaning the Dyson V6

Cleaning the Brush Bar

Action 1: Getting Rid Of the ToolDisconnect the Motorised flooring device from the stick by pushing the launch switch.

Action 2: Opening completion CapPlace the floorhead upside-down to ensure that the bottom is encountering you. After that, take a coin as well as unlock the bolt that is noted with a lock.

Action 3: Getting Rid Of the Big Brush BarRotate completion cap to the employment opportunity, after that carefully glide the big brush bar far from the cleaner head. Eliminate completion cap from the brush bar.

Action 4: Getting Rid Of the Little Brush BarLift the tiny brush bar far from the octagonal end as well as draw it out of the flooring device.

Tip 5: Cleaning the Brush BarHold each of the brush bars under running water as well as carefully massage it to eliminate any kind of dust or dust.

Action 6: Drying Out the Brush BarStand each of the brush bars upright as well as leave them both to completely dry for at the very least 24 hrs (or longer if required)

Action 7: Renovating the Little Brush BarOnce they are entirely dry, you have to change the tiny brush bar prior to the big one. Place the rounded end of bench right into area, and after that lower the octagonal end up until it clicks right into area.

Action 8: Renovating completion CapNow, you can reattach completion cap to the brush bar.

Action 9: Renovating the Big Brush BarSlide the big brush bar back onto the flooring device while completion cap remains in the employment opportunity. Once it remains in area, revolve completion cap back right into the shut setting.

Action 10: Securing completion CapGrab the coin once more as well as secure the cap by transforming it clockwise. Guarantee that it is totally transformed, as well as both the baseplate as well as brush bar are safe and secure. After that, placed the motorised device back onto the stick.

Cleansing the Dyson V7

Cleaning the Dirt Container

Action 1: Getting rid of the BinIn order to launch the clear container from the cyclone, you require to press the red switch beside it in order to open up the base of the container. Press it a 2nd time to launch the clear container from the text. Eliminate it very carefully.

Action 2: Cleansing the Clear BinYou must just utilize a wet towel to clean up the within. See to it it is not as well damp, as well as carefully scrub the inside.

Action 3: Cleansing the ShroudTake the cleaning brush on the mix device as well as utilize it to carefully eliminate dust as well as dirt. You need to never ever submerse the cyclone system in water or put water right into the cyclones.

Action 4: Renovate the BinOnce the container is entirely dry, press it up as well as right into the text of the hoover. When you hear it click right into area, the job is done.

Cleaning the Filter

Action 1: Getting Rid Of the FilterOnce the vacuum cleaner has actually been detached from the billing factor, you can eliminate the filter by raising it out of the top of the maker. Take care not to push the trigger while you are doing so.

Action 2: Cleaning the FilterWash the beyond the filter by holding it under chilly running water up until it is clear as opposed to dirty. When this is done, press as well as turn the filter with both hands to eliminate excess water.

Action 3: Drying Out the FilterPlace the filter on its side as well as leave it to completely dry for a minimum of 24 hrs, or up until entirely dry.

Action 4: Changing the FilterPlace the completely dry filter back right into the top of the maker as well as make certain that it is secured correctly.

Cleaning the Dyson V7

Cleaning the Brush Bar

Action 1: Getting Rid Of the ToolDisconnect the Motorised flooring device from the stick by pushing the launch switch.

Action 2: Opening completion CapTurn the floorhead upside-down to ensure that you are encountering the bottom. Take a coin as well as utilize it to open the bolt, which is noted with a lock.

Action 3: Getting Rid Of the Big Brush BarOnce completion cap remains in the employment opportunity, carefully glide the big brush bar far from the cleaner head, after that eliminate completion cap from it.

Action 4: Getting Rid Of the Little Brush BarLift the tiny brush bar out of the octagonal end as well as far from the flooring device.

Tip 5: Cleaning the Brush BarHold each of the brush bars under running water as well as carefully massage it to eliminate any kind of dust or dust.

Action 6: Drying Out the Brush BarStand each of the brush bars upright as well as leave them both to completely dry for at the very least 24 hrs up until they are bone completely dry.

Action 7: Renovating the Little Brush BarOnce they are entirely dry, you have to change the tiny brush bar prior to the big one. Place the rounded end of bench right into area, and after that lower the octagonal end up until it clicks right into area.

Action 8: Renovating completion CapNow, you can reattach completion cap to the brush bar.

Action 9: Renovating the Big Brush BarSlide the big brush bar back onto the flooring device while completion cap remains in the employment opportunity. Once it remains in area, revolve completion cap back right into the shut setting.

Action 10: Securing completion CapGrab the coin once more as well as secure the cap by transforming it clockwise. Guarantee that it is totally transformed, as well as both the baseplate as well as brush bar are safe and secure. After that, placed the motorised device back onto the stick.

Cleansing the Dyson V8

Cleaning the Dirt Container

Action 1: Getting Rid Of the Clear BinTo launch the dirt cylinder from the cyclone, merely hold the maker by the deal with as well as draw the red bar back. Raise it upwards to launch the cyclone, as well as proceed up until the base of the container opens up totally. Hereafter, push the red container launch catch as well as eliminate it with treatment.

Action 2: Cleaning up the BinOnly utilize a wet towel to clean up the container, as well as make certain that it is not as well damp. Utilize it to carefully eliminate dust from the inside of the clear cylinder.

Action 3: Cleansing the ShroudTake the mix device as well as click the cleaning brush in position. You can after that utilize it to eliminate dust as well as dirt from the maker, however never ever submerse the cyclone in water or put water right into the cyclones themselves.

Action 4: Renovate the BinEnsure the clear container is entirely dry prior to changing. To change the clear container, press the clear container up as well as right into the text of the maker, permitting it to click right into area.

Tip 5: Renovate the CycloneAlign the joggers on the cyclone with the ports on the text prior to gliding it down up until it clicks right into area. When this is done, shut the container base, permitting it to click, as well as finishing the procedure.

Cleaning the Pre-Filter

Action 1: Getting Rid Of the FilterOnce the vacuum cleaner has actually been detached from the billing factor, you can eliminate the filter by raising it out of the top of the maker. Take care not to push the trigger while you are doing so as this will certainly transform the vacuum cleaner on.

Action 2: Cleaning the FilterWash the beyond the filter by holding it under chilly running water up until it is clear. When this is done, press as well as turn the filter with both hands to eliminate excess water.

Action 3: Drying Out the FilterPlace the filter on its side as well as leave it to completely dry for a minimum of 24 hrs, or up until entirely dry. It is very important to keep in mind that it can take 2 days to completely dry totally.

Action 4: Changing the FilterPlace the completely dry filter back right into the top of the maker as well as make certain that it is secured correctly.

Cleaning the Post-Filter

Action 1: Getting Rid Of the FilterEnsure the maker is detached from the battery charger prior to eliminating the filter. Take care not to shoot as this will certainly transform the vacuum cleaner on. To eliminate the filter, spin anticlockwise to the employment opportunity, as well as retreat from the maker.

Action 2: Cleaning the FilterWash the within the filter with chilly water, as well as make certain that it is running. Revolve the filter as you do so, making sure all the pleats are covered. After that, carefully touch the filter versus the side of the sink to eliminate particles as well as excess water. Repeat the procedure up until the filter is tidy.

Action 3: Drying Out the FilterPlace the filter in an upright setting as well as delegate completely dry for at the very least 24 hrs, although the procedure might take much longer.

Action 4– Changing the FilterOnce the filter is entirely dry, return it to the employment opportunity as well as spin it clockwise up until you hear it click right into area.

Cleaning the Dyson V8

Cleaning the Soft Roller as well as Brush Bar

Action 1: Getting Rid Of the ToolFirst, separate the motorised flooring device from the stick by pushing the launch switch.

Action 2: Opening completion CapTurn the floorhead upside-down to ensure that you are encountering the bottom. Take a coin as well as utilize it to open the bolt, this is noted with a lock sign.

Action 3: Getting Rid Of the Big Brush BarOnce completion cap remains in the employment opportunity, carefully glide the big brush bar far from the cleaner head, after that eliminate the cap.

Action 4: Getting Rid Of the Little Brush BarLift the tiny burhs prevent out of the octagonal end. Following this, relocate out as well as away from the flooring device.

Tip 5: Cleaning the Brush BarGently massage the brush bars under chilly running water to eliminate any kind of dust or dust that has actually come to be captured in the bristles.

Action 6: Drying Out the Brush BarStand each of the brush bars upright as well as leave them both to completely dry for at the very least 24 hrs, although the procedure can take longer to finish.

Action 7: Renovating the Little Brush BarOnce they are entirely dry, it is very important that you change the tiny brush bar prior to the big one. Place the rounded end of bench right into area, and after that lower the octagonal end up until it clicks.

Action 8: Renovating completion CapAt this factor, you can reattach completion cap.

Action 9: Renovating the Big Brush BarSlide the big brush bar back onto the flooring device while completion cap remains in the employment opportunity. Once it remains in area, revolve completion cap back right into the shut setting.

Action 10: Securing completion CapUsing the coin, secure completion cap by transforming it clockwise as well as make certain that it is totally transformed. Inspect that the baseplate as well as brush bar is safe and secure, and after that put the floorhead back onto the stick.

Soft Roller Elimination

Action 1: Getting Rid Of the Soft RollerDisconnect the soft roller flooring device from the stick by pushing the launch switch.

Action 2: Opening completion CapTurn the Soft roller flooring device upside-down, so the bottom of the flooring device is encountering you. After that, utilize a coin to open the bolt, which is noted with a lock.

Action 3: Getting Rid Of the Brush BarRotate completion cap to the employment opportunity, and after that carefully glide the brush bar far from the floorhead. You can after that eliminate completion cap.

Action 4: Cleaning the Brush BarWhile holding the brush bar under great running water, carefully massage it to eliminate any kind of dust as well as particles.

Tip 5: Drying Out the Brush BarStanding the brush bar upright, leave it to completely dry for at the very least 24 hrs. Remember that it can take much longer for it to complete drying out.

Action 6: Renovating completion CapReattach completion cap to the brush bar once it is entirely dry.

Action 7: Renovating the Brush BarNow, slide the brush bar back right into the flooring device as well as around the electric motor with completion cap outdoors setting. Once it remains in area, revolve completion cap back right into the shut setting. You can do this making use of a coin to transform it clockwise, as well as later on, you need to make certain the baseplate as well as brush bar are safe and secure.

Cleansing the Dyson V10

Cleaning the Dirt Container

Action 1: Eliminate the BinFully press the red container launch bar far from the deal with of the maker. Press as well as hold the red catch on the bottom of the container as well as glide the container off the maker. Make use of a wet towel to clean up the clear container if required.

Action 2: Inspect Container SealsCheck the seals around the top of the container where it fits the maker, as well as examine the seals around the edge of the container cover for any kind of damages.

Action 3: Inspect the Cyclone Shadow as well as InletWith the container got rid of, examine that there is no accumulation of dirt as well as particles around the cyclone shadow. Eliminate as required with a completely dry towel or the cleaning brush from the mix device. With the maker encountering far from you, on the best side of the cyclone, you will certainly locate a tiny inlet. Inspect the inlet for any kind of dirt, particles, or fibers, as well as eliminate as required

Cleaning the Filter

Action 1: Getting Rid Of the FilterRemove the filter by turning anticlockwise to the employment opportunity as well as carefully draw it away.

Action 2: Cleansing the FilterRemove any kind of excess particles from the filter prior to cleaning. Laundry the within filter system initially, as well as hold it upright under a chilly faucet while upseting it making use of a revolving activity. Laundry the beyond the filter system. Load system with chilly water, hold among your turn over the top, as well as drink carefully. Repeat both procedures up until water runs clear. Delicately faucet filter to eliminate excess dampness prior to you dry it out.

Action 3: Drying out the FilterLeave system to completely dry outdoors (as well as encountering up) for 24 hrs or up until entirely dry

Action 4: Renovating the FilterEnsure filter is entirely dry prior to you renovate it. To renovate, return filter system to the employment opportunity as well as spin clockwise up until it clicks right into area.

Cleaning the Dyson V10

Cleaning the Brush Bar

Action 1: Getting Rid Of the Soft RollerDisconnect the soft roller flooring device from the stick by pushing the launch switch.

Action 2: Opening completion CapFlip the soft roller upside-down to ensure that you can see the bottom. Afterwards, take a coin as well as unlock the bolt which is noted with a lock sign.

Action 3: Getting Rid Of the Brush BarRotate completion cap to the employment opportunity, and after that carefully glide the brush bar far from the floorhead prior to eliminating completion cap.

Action 4: Cleaning the Brush BarWhile holding the brush bar under great running water, carefully massage it to eliminate any kind of dust as well as particles.

Tip 5: Drying Out the Brush BarLeave the brush to completely dry for at the very least 24 hrs standing upright. It must be kept in mind that the drying out procedure can take much longer.

Action 6: Renovating completion CapReattach completion cap to the brush bar once it is entirely dry.

Action 7: Renovating the Brush BarNow, slide the brush bar back right into the flooring device as well as around the electric motor with completion cap outdoors setting. Once it remains in area, revolve completion cap back right into the shut setting. You can do this making use of a coin to transform it clockwise, as well as later on, you need to make certain the baseplate as well as brush bar are safe and secure.

In Conclusion

Ideally, this overview has actually assisted you discover just how to cleanse your Dyson cordless hoover, as well as you currently have the understanding to maintain your version in leading problem, so it’s constantly all set to go. It’s not a hard procedure, as well as while it might be a little taxing, it can be the distinction in between your vacuum cleaner lasting ages, as well as the maker malfunctioning after a year approximately of usage. The filters are crucial in this regard, however maintaining the remainder of it tidy is additionally advantageous.

What did you consider our Dyson cleansing overview? Is it something that you discovered valuable, or exist various other ideas that you would certainly have suched as to see below? We like learning through you, so make certain to leave us a message in the remarks listed below.